Ubiquiti UA-G2-Pro UniFi Access G2 Pro Reader (Black)

Black

160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6")

136 g (4.8 oz)

Polycarbonate, glass

Aluminium alloy

Wall, gang box

IP55

(1) GbE RJ45 port

BLE 4.2, NFC

PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU

48V DC

6W

Air: ±15kV, contact: ±8kV

Proximity sensor

H: 96.67°, V: 123.15°, D: 153.11°

Yes

(1) 4 ohm, 1.5W

R/G/B/W/Amber

(1) Factory-reset

13.56 MHz

< 30 mm

ISO 14443A, 14443B, 15693

NFC Tag 1,2,3,4,5
MIFARE Classic
MIFAREPlus
MIFARE Ultralight
MIFARE DESFire

Outdoor use

Device: -30 to 45° C (-22 to 113° F)
Display:* -10 to 45° C (14 to 113° F)

5 to 90% noncondensing

The software version of a product can be checked at https://unifi.ui.com

Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I

Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.

Grade assignment: I

CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

UA-G2-Pro-Black, V02

UniFi Access: Version 1.5.9 and later